If you have been reading about Reconstitution and want a single page that covers the useful parts, this is it: definitions, context, how it is studied, and the questions that come up repeatedly.
Last reviewed on 2026-01-03. Where a claim depends on a specific study, the study is described rather than over-claimed.
Four amino acid substitutions separate the modified backbone from the parent GRF(1-29) sequence. These changes reduce recognition by dipeptidyl peptidase IV and related proteases, extending the interval before degradation. Development work in this area sought longer-acting GHRH analogs for endocrine investigation. Published descriptions treat the substitution set as a defining property of the core sequence, while the albumin-binding linker is described separately as an optional addition to that same backbone.
CJC-1295 is a synthetic peptide analog of growth hormone-releasing hormone, constructed on the 29-amino-acid fragment designated GRF(1-29). The name began as an internal development code during the 1990s and later spread through research supply catalogs and discussion forums. The molecule does not occur in nature; its sequence is engineered rather than isolated from tissue. Two related compounds are sold under this single label, and they differ by one appended chemical group that strongly influences how long the peptide remains in circulation.
The dividing feature between the two forms is a maleimide-based drug affinity complex, abbreviated DAC. In the DAC-bearing version, a linker attaches the peptide to serum albumin after administration, and that association slows removal from plasma. The version lacking DAC appears in catalogs as MOD GRF(1-29) or tetrasubstituted GRF(1-29). Because informal writing treats both as one item, comparisons drawn from such sources routinely blend measurements taken from two molecules with substantially different behavior.
Stability depends heavily on physical state. A lyophilized powder kept dry, desiccated, and shielded from light typically holds its integrity for months to years at minus twenty degrees Celsius, and longer at minus eighty. Once dissolved, the peptide becomes far more vulnerable, since peptide bond hydrolysis, oxidation of susceptible residues, and aggregation all proceed faster in solution. Buffers near neutral pH are generally gentler than strongly acidic or alkaline conditions. Repeated freeze-thaw cycles and exposure to air-liquid interfaces during vigorous mixing cause losses that are easy to overlook.
Verification matters because research peptides vary widely in quality. A certificate of analysis is only as reliable as the method behind it, and a single chromatographic trace reveals little about counter-ions, residual solvents, or water content. Independent laboratories commonly pair mass confirmation with chromatographic purity and, where relevant, quantify water along with acetate or trifluoroacetate content. Reported purity figures are not standardized across suppliers, so a stated value such as ninety-eight percent is not directly comparable unless the analytical method, column, and detection wavelength accompany it.
Characterization of this peptide relies on a small set of routine techniques. Reversed-phase high-performance liquid chromatography separates the target from truncated or oxidized by-products and yields a purity estimate when paired with ultraviolet detection near 214 nanometers. Mass spectrometry, either electrospray coupled to liquid chromatography or matrix-assisted laser desorption, confirms that the observed mass matches the value calculated for the expected sequence. Amino acid analysis, and enzymatic digestion followed by fragment mapping, are used when the sequence itself rather than the mass requires verification.
| Property | Value | Notes |
|---|---|---|
| Molecular class | Synthetic peptide | Analog of growth hormone-releasing hormone |
| Chain length | 29 amino acids | Based on the GRF(1-29) fragment |
| Appearance | White to off-white lyophilized powder | Common research supply form |
| Solubility | Soluble in water and aqueous buffers | Powder requires reconstitution before use |
| Typical storage | −20 °C or below | Kept away from light and moisture |
CJC-1295 is the name used for a synthetic peptide modeled on growth hormone-releasing hormone, the hypothalamic signal that prompts the pituitary to release growth hormone. The compound was described by a Canadian drug discovery company in the mid-2000s as a long-acting research tool. Two closely related molecules share the name in practice: one carries a drug affinity complex, or DAC, group, and one does not. The distinction matters because the two behave differently in circulation.
The peptide backbone corresponds to GRF(1-29), the first 29 residues of native growth hormone-releasing hormone, which retains most of the receptor-activating activity of the full-length molecule. Four substitutions distinguish the analog from the natural sequence: D-alanine at position 2, glutamine at position 8, alanine at position 15, and leucine at position 27. These changes slow cleavage by dipeptidyl peptidase IV, the enzyme that degrades native hormone in plasma within minutes. The outcome is improved enzymatic stability combined with a still brief residence time when no additional modification is present.
Peptide degradation proceeds mainly through hydrolysis, oxidation of methionine, and deamidation of asparagine or glutamine residues. The maleimide group on the albumin-binding variant can also react with thiols or hydrolyze in aqueous media. Because these pathways accelerate with temperature and pH extremes, handling conditions strongly influence measured stability. Stability data in the public literature are limited and often generated under differing conditions, so general statements about shelf life should be read as approximate.
Research material is normally supplied as a freeze-dried powder in sealed vials. In that state the peptide is comparatively robust, but prolonged exposure to warmth, moisture, or light accelerates degradation. Storage at minus twenty degrees Celsius or lower, with desiccant and protection from light, is the commonly described practice. Vials should be allowed to reach room temperature before opening to limit condensation on the powder. Moisture uptake during handling is a recognized source of variability in later measurements.
Reconstitution is typically performed with sterile water or bacteriostatic water, added slowly against the vial wall. The resulting solution should be clear and colorless; cloudiness or visible particles suggest a problem with the material or the diluent. Once in solution, the peptide is less stable than the dry powder. Refrigerated storage at two to eight degrees Celsius is common for short-term holding, while freezing aliquots is described for longer periods.
Lyophilized material is generally stable for extended periods when held at minus twenty degrees Celsius or below and protected from moisture and light. In solution the peptide is more labile; bond hydrolysis, aggregation and oxidation of susceptible residues all proceed faster at ambient temperature. Repeated freeze and thaw cycles should be avoided because they promote clumping and loss of soluble material. The conjugated variant adds a further consideration, since the maleimide group can hydrolyze in aqueous buffer and lose its ability to react with albumin.
Laboratory handling centers on minimizing exposure to water, heat and oxygen before use. Working solutions are typically prepared in sterile water or a mild buffer, and any residual particulate matter is removed by filtration. When the powder dissolves slowly, a small proportion of acetonitrile or dilute acetic acid is sometimes added as a co-solvent. Containers are kept sealed and desiccated between uses. Records of lot number, reconstitution date and storage conditions support later comparison of results across experiments.
The first β-sheet structure was proposed by William Astbury in the 1930s. He proposed the idea of hydrogen bonding between the peptide bonds of parallel or antiparallel extended β-strands. However, Astbury did not have the necessary data on the bond geometry of the amino acids in order to build accurate models, especially since he did not then know that the peptide bond was planar. A refined version was proposed by Linus Pauling and Robert Corey in 1951. Their model incorporated the planarity of the peptide bond which they previously explained as resulting from keto-enol tautomerization.
The tertiary structure and topology of TMEM125 was predicted and visualized through Phyre2. TMEM125 has 1 predicted phosphorylation site (CK2 Phos), 5 predicted N-myristoylation sites (N-myr), 2 predicted palmitoylation sites (Pal), and 1 predicted amidation site (Amid). It also contains the domain of unknown function 66 (DUF66). TMEM125 is predicted to be subcellularly localized in the plasma membrane. It is secondarily predicted to be localized in the endoplasmic reticulum. There were no scientifically-verified protein interactions identified for TMEM125. String Protein Interaction predicted 10 functional protein partners for TMEM125, but all were determined through textmining. TMEM125 is conserved in species as distantly related to humans as cartilaginous fish, that’s most recent common ancestor to humans existed 465 million years ago. TMEM125 is highly conserved in primates, mammals, birds, reptiles, bony fish, and cartilaginous fish, but is not observed in invertebrates. TMEM125 does not have any paralogs.
In both pharmacology and nutrition sciences, bioavailability is measured by calculating the area under curve (AUC) of the drug concentration time profile. Bioavailability is a term used to describe the percentage of an administered dose of a xenobiotic that reaches the systemic circulation unchanged. It is denoted by the letter f (or, if expressed in percent, by F). In nutritional science, which covers the intake of nutrients and non-drug dietary ingredients, the concept of bioavailability lacks the well-defined standards associated with the pharmaceutical industry. The pharmacological definition cannot apply to these substances because utilization and absorption is a function of the nutritional status and physiological state of the subject, resulting in even greater differences from individual to individual (inter-individual variation). Therefore, bioavailability for dietary supplements can be defined as the proportion of the administered substance capable of being absorbed and available for use or storage.
Hydrostatic CCC or centrifugal partition chromatography (CPC) was invented in the 1980s by the Japanese company Sanki Engineering Ltd, whose president was Kanichi Nunogaki. CPC has been extensively developed in France starting from the late 1990s. In France, they initially optimized the stacked disc concept initiated by Sanki. More recently, in France and UK, non-stacked disc CPC configurations have been developed with PTFE, stainless steel or titanium rotors. These have been designed to overcome possible leakages between the stacked discs of the original concept, and to allow steam cleaning for good manufacturing practice. The volumes ranging from a 100 ml to 12 liters are available in different rotor materials. The 25-liter rotor CPC has a titanium rotor. This technique is sometimes sold under the name "fast" CPC or "high-performance" CPC.
Sources: en.wikipedia.org
People can also develop CJD because they carry a mutation of the gene that codes for the prion protein (PRNP), located on chromosome 202p12-pter. This occurs in only 10–15% of all CJD cases. In sporadic cases, the misfolding of the prion protein is a process that is hypothesized to occur as a result of the effects of aging on cellular machinery, explaining why the disease often appears later in life. An EU study determined that "87% of cases were sporadic, 8% genetic, 5% iatrogenic and less than 1% variant." Testing for CJD has historically been problematic, due to the nonspecific nature of early symptoms and difficulty in safely obtaining brain tissue for confirmation. The diagnosis may initially be suspected in a person with rapidly progressing dementia, particularly when it is also found with the characteristic medical signs and symptoms such as involuntary muscle jerking, difficulty with coordination/balance and walking, and visual disturbances. Further testing can support the diagnosis and may include:
As anti-angiogenic cancer therapies have achieved widespread use, there has been increased interest in non-invasive monitoring of angiogenesis. One of the most extensively examined targets of angiogenesis is integrin αVβ3. Radiolabeled peptides containing RGD show high affinity and selectivity for integrin αVβ3 and are being investigated as tools to monitor treatment response of tumors via PET imaging. These include 18F-Galacto-RGD, 18F-Fluciclatide-RGD, 18F-RGD-K5, 68Ga-NOTA-RGD, 68Ga-NOTA-PRGD2, 18F-Alfatide, 18F-Alfatide II, and 18F-FPPRGD2. In a meta-analysis of studies using PET/CT in patients with cancer, it was shown that this diagnostic method may be very useful for detecting malignancies and predicting short-term outcomes, although larger-scale studies are needed.
c7orf26 is highly phosphorylated post modified. There are 66 predicted phosphorylated sites according to the NetPhos predictor of phosphorylation sites. There are 4 unique sumoylation sites according to SUMOplot/SUMOsp programs. Sumoylation sites are involved in a number of cellular processes, including nuclear-cytosolic transport, transcriptional regulation and protein stability. According DAS-TMFilter Server, c7orf26 has zero predicted transmembrane sites or transmembrane protein coding regions, therefore, it can be inferred with certainty that c7orf26 is not a transmembrane protein. Using the GOR (Garnier-Osguthorpe-Robson) method, it can be inferred that c7orf26 has unique secondary structure composed of alpha helices, random coil regions and extended strands. Random coil regions are most found in c7orf26, as they constitute 53.23% of the protein, while alpha helices constitute 34.30% and extended strands 12.47%. According to PSORT, c7orf26 is predicted to be localized in the cytoplasm with 70.6% confidence.
Sources: en.wikipedia.org
RGD was identified as the minimal recognition sequence within fibronectin required for cell attachment by Ruoslahti and Pierschbacher in the early 1980s. To do this, the authors synthesized various peptides based on the hypothesized cell attachment site of fibronectin. They then coupled those peptides to protein-coated plastic and tested each for cell attachment-promoting activity. Only those that contained the RGD sequence were found to enhance cell attachment. Further, they showed that peptides containing RGD were able to inhibit cell attachment to fibronectin-coated substrates, whereas peptides not containing RGD did not. These foundational studies also identified the cellular receptors that recognize the sequence. These studies utilized a synthetic RGD-containing peptide to isolate the putative receptors, and then demonstrated that liposomes containing the isolated proteins could bind to fibronectin, in much the same way as cells with surface receptors. The discovered receptors were later named integrins. The RGD motif is presented in slightly different ways in different proteins, making it possible for the many RGD-binding integrins to selectively distinguish individual adhesion proteins.
ADAM (A Database of Anti-Microbial peptides) Archived 2015-06-17 at the Wayback Machine at ntou.edu.tw AntiFP Prediction of antifungal peptides AntiMPmod Prediction of antimicrobial potential of modified peptides Antimicrobial+Cationic+Peptides at the U.S. National Library of Medicine Medical Subject Headings (MeSH) AntiTbPred Prediction of anti-tuberculosis peptides Antimicrobial Peptide Database Archived 2011-07-20 at the Wayback Machine at University of Nebraska Medical Center Antimicrobial Peptide Scanner Deep Learning based AMP prediction server AntiTbPdb Anti Tubercular Peptide Database BioPD[link removed] at Peking University Health Science Center CAMP:Collection of Anti-Microbial Peptides at National Institute for Research in Reproductive Health (NIRRH) DBAASP - Database of Antimicrobial Activity and Structure of Peptides] LAMP at Fudan University PeptideLocator Prediction of functional peptides, including antimicrobial peptides, in a protein sequence PeptideRanker Bioactive peptide, including antimicrobial peptide, prediction modlAMP Python package for computational work with antimicrobial peptides, including sequence handling, -design, -prediction, descriptor calculation and plotting
In 2001, Nakai et al. reported the development of GCaMP1 as a Ca2+ probe with improved signal-to-noise ratio compared to previously developed fluorescent Ca2+ probes. The first transgenic mouse expressing GCaMP1 was reported in 2004. However, at 37 ˚C (physiological temperature in mammals), GCaMP1 did not fold stably or fluoresce, limiting its potential use as a calcium indicator in vivo. In 2006, Tallini et al. subsequently reported the improvement of GCaMP1 to GCaMP2, which exhibited brighter fluorescence than GCaMP1 and greater stability at mammalian body temperatures. Tallini et al. expressed GCaMP2 in cardiomyocytes in mouse embryos to perform the first in vivo GCaMP imaging of Ca2+ in mammals. Further modifications of GCaMP, including GCaMP3, GCaMP5, GCaMP6, and jGCaMP7, have been developed to progressively improve the signal, sensitivity, and dynamic range of Ca2+ detection, with recent versions exhibiting fluorescence similar to native GFP.
Sources: en.wikipedia.org
No. It is a laboratory-synthesized analog built on a fragment of the natural hormone. The natural peptide is shorter-lived and lacks the stabilizing substitutions found in the synthetic version.
DAC stands for drug affinity complex, a chemical group that binds the peptide to serum albumin. The binding slows clearance and lengthens the time the molecule stays in plasma compared with the unmodified analog.
Because two distinct molecules are discussed under one informal label. The albumin-binding version clears over several days, while the form without that group clears within roughly half an hour. Mixing results from both creates inconsistent figures.
Mass spectrometry establishes whether the observed molecular weight matches the calculated sequence mass. Chromatographic retention and fragment mapping add further confidence about sequence and composition. A single technique alone is rarely treated as sufficient evidence of identity.